Skill Practice - Fixed Appliances

Objective

To install and connect various electrotechnology apparatus using a range of electrotechnology tools and equipment.

At the completion this practical exercise you should be able to:

• Observe correct circuit isolation procedures when working with electrical equipment.
• Select and inspect electrical equipment to ensure it is suitable for installation.
• Select and inspect electrical tools and equipment are safe and suitable for use.
• Install equipment according to plan supplied and to manufactures directions.
• Ensure installed equipment complies with Australian standards.
• Connect an electrical circuit using a circuit diagram as a guide

Task

For this skill practice :

• Install the equipment as shown on the diagram

• Read AS/NZS 3000 clause 4.7 

• A cooking appliance having an open cooking surface shall be provided with a switch,

  operating in all active conductors, mounted near the appliance in a

  visible and readily accessible position and shall be marked to identify the appliance controlled. what is the minimum side clearance if the switch is to be mounted on the wall behind  the appliance?

  mm.

• The cook-top is rated at 8.2kW and its supply cable is to be installed partially surrounded in thermal insulation, look up AS3000 table C5 and C6 to determine the correct cable size.

• Does a fixed wired hot water system require an isolating switch?
  Yes.

  No.
  . Clause
• The hot water system is rated at 4.8 kW, 240 V. Using I = P/U determine the load current and select the correct size cable to install if the cable is installed partially surrounded by thermal insulation.

Skill Practice - Fixed Appliances

Objective

To install and connect various electrotechnology apparatus using a range of electrotechnology tools and equipment.

At the completion this practical exercise you should be able to:

• Observe correct circuit isolation procedures when working with electrical equipment.
• Select and inspect electrical equipment to ensure it is suitable for installation.
• Select and inspect electrical tools and equipment are safe and suitable for use.
• Install equipment according to plan supplied and to manufactures directions.
• Ensure installed equipment complies with Australian standards.
• Connect an electrical circuit using a circuit diagram as a guide

Task

For this skill practice :

• Install the equipment as shown on the diagram

• Read AS/NZS 3000 clause 4.7 

• A cooking appliance having an open cooking surface shall be provided with a switch,

  operating in all active conductors, mounted near the appliance in a

  visible and readily accessible position and shall be marked to identify the appliance controlled. what is the minimum side clearance if the switch is to be mounted on the wall behind  the appliance?

  mm.

• The cook-top is rated at 8.2kW and its supply cable is to be installed partially surrounded in thermal insulation, look up AS3000 table C5 and C6 to determine the correct cable size.

• Does a fixed wired hot water system require an isolating switch?
  Yes.

  No.
  . Clause
• The hot water system is rated at 4.8 kW, 240 V. Using I = P/U determine the load current and select the correct size cable to install if the cable is installed partially surrounded by thermal insulation.

Skill Practice - Fixed Appliances

Objective

To install and connect various electrotechnology apparatus using a range of electrotechnology tools and equipment.

At the completion this practical exercise you should be able to:

• Observe correct circuit isolation procedures when working with electrical equipment.
• Select and inspect electrical equipment to ensure it is suitable for installation.
• Select and inspect electrical tools and equipment are safe and suitable for use.
• Install equipment according to plan supplied and to manufactures directions.
• Ensure installed equipment complies with Australian standards.
• Connect an electrical circuit using a circuit diagram as a guide

Task

For this skill practice :

• Install the equipment as shown on the diagram

• Read AS/NZS 3000 clause 4.7 

• A cooking appliance having an open cooking surface shall be provided with a switch,

  operating in all active conductors, mounted near the appliance in a

  visible and readily accessible position and shall be marked to identify the appliance controlled. what is the minimum side clearance if the switch is to be mounted on the wall behind  the appliance?

  mm.

• The cook-top is rated at 8.2kW and its supply cable is to be installed partially surrounded in thermal insulation, look up AS3000 table C5 and C6 to determine the correct cable size.

• Does a fixed wired hot water system require an isolating switch?
  Yes.

  No.
  . Clause
• The hot water system is rated at 4.8 kW, 240 V. Using I = P/U determine the load current and select the correct size cable to install if the cable is installed partially surrounded by thermal insulation.

Which of the following can cause damage to cable insulation when drawing cables into metallic conduit?

The numbers 7/0.67 being marked on a drum of TPS cable indicates

If rigid non-metallic conduit is installed in a roof space of a factory

What is the maximum length of cable sheath that can be removed from a TPS cable at terminations enclosed in a wall cavity

AS3000 Clause

Does the TV outlet and coax meet the requirements of AS3000 3.9.8.3 a)

How can the coax cable be installed to provide segregation from low voltage 

What method is used to protect the rear terminals of the TV outlet from low voltage

What is the definition of extra low voltage 

AS3000 Clause

What is the minimum number of elektroWEX entries "to be submitted" to have a acceptable profile status at the time of a final assessment?