Шукаєте відповіді та рішення тестів для UEECD0046 & UEECD0044 Solve problems in d.c. circuits (14016)? Перегляньте нашу велику колекцію перевірених відповідей для UEECD0046 & UEECD0044 Solve problems in d.c. circuits (14016) в learn.sydneytafe.edu.au.
Отримайте миттєвий доступ до точних відповідей та детальних пояснень для питань вашого курсу. Наша платформа, створена спільнотою, допомагає студентам досягати успіху!
A 100 Ω resistor connected in a series circuit draws a current of 200mA. Calculate the voltage across the resistor:
a) What is the nominal value of the resistor
b) What is the resistance range? to ohms.
c) Does the measured value fall within the specified tolerance?
Colour | Value | Multiplier | Tolerance |
Black | 0 | 1 | - |
Brown | 1 | 10 | 1% |
Red | 2 | 100 | 2% |
Orange | 3 | 1,000 | - |
Yellow | 4 | 10,000 | - |
Green | 5 | 100,000 | 0.5% |
Blue | 6 | 1,000,000 | 0.25% |
Violet | 7 | - | 0.1% |
Grey | 8 | - | - |
White | 9 | - | - |
Gold | - | 0.1 | 5% |
Silver | - | 0.01 | 10% |
Which of the following stuations would not cause a loss of supply to resistor R2?
Power loss in an electrical cable is primarily due to:
When an NTC thermistor is heated, the measured resistance of the device:
When a PTC thermistor is heated, the measured resistance of the device:
When a Light Dependent Resistor is exposed to increasing levels of light, the measured resistance of the device:
When the voltage applied to a Voltage Dependent Resistor exceeds the clamping voltage, the measured resistance of the device:
Match the type of resistor to its application.
Identify the following variable resistors below.
Circuit (A) uses a
Отримайте необмежений доступ до відповідей на екзаменаційні питання - встановіть розширення Crowdly зараз!