Schaltungsentwurf Praktikum
Looking for Schaltungsentwurf Praktikum test answers and solutions? Browse our comprehensive collection of verified answers for Schaltungsentwurf Praktikum at elearning.rwu.de.
Get instant access to accurate answers and detailed explanations for your course questions. Our community-driven platform helps students succeed!
Implement a PT100, represented as a resistor that changes from 80 Ohms at 0 °C to 120 Ohms at 100 °C with a slider.
Please use a current source to run a current of 5 mA through the PT100.
Then use unity gain amplifiers and a differential amplifier to achieve an output of 15V maximum at 100°C.
Use a summing amplifier to modify the lower end of the range to 0 V.
Export your solution to text and upload it on Moodle (no grading, but feedback).
Simulate a string of LED lights with 5 LEDs in the Falstad Circuit Simulator.Dimension the voltage source so that you can set up voltage stabilisation with a Zener diode.The LEDs should operate with a current flow of approx. 50mA.Export the simulation as text and submit the text as your solution.As before, no copied solutions.
Please design a voltage divider in the Falstad Circuit Simulator that generates an output voltage of 9 V from a supply voltage of 12 V.Use this output voltage to supply a light-emitting diode with a current-limiting resistor. Select the current-limiting resistor so that a current of 30 mA flows through the LED.Export the circuit as text and paste this text into your answer. No copied solutions; if two texts are identical, both will receive 0 points.
Want instant access to all verified answers on elearning.rwu.de?
Get Unlimited Answers To Exam Questions - Install Crowdly Extension Now!